Installation Instructions - Truma BCU 120 Instrucciones De Uso Instrucciones De Montaje

Accessories
Panel BCU (120)
The Panel BCU (120) is a
visual and acoustic low-volt-
age warning device. A flashing
LED warns that the consumer
is about to be shut down (at
approx. 11 V). An intermittent
tone signalizes that the con-
sumer has been shut down
(at approx. 10.8 V).
(part no. C14301-01)

Installation instructions

Safety instructions
Installation in vehicles must accord with the technical and
administrative provisions of the individual country of use
(e.g. EN 1648). The national legislation and regulations must
be observed.
In other countries always observe the respectively valid
regulations.
Only qualified technicians may assemble and connect electri-
cal devices!
Ensure that the power supply has been disconnected! Discon-
nect the mains plug!
Only use the supplied parts and the specified cable cross-sec-
tions and fuses to connect the device!
Only use suitable and fully functional tools.
Only wire the device as specified in the supplied wiring
diagram!
9