Important - Amana AAC051FRA Manual Del Propietário

6
SECURE SIDE
CURTAINS
Expand curtains as far as possible.
Install (5) 25-mm curtain sash
screws. For hard wood or metal
window frames, drill a 1/8” diameter
pilot hole to start screw.
IMPORTANT: Be careful not to drill
pilot hole too deep. Add a piece of
tape to the drill bit as a depth
gauge. Also stay clear of glass. Be
careful not to damage the function of
the window.
7
INSTALL SEAL
GASKET
Cut window seal gasket to width of
window. Stuff window seal gasket
between outdoor window glass and
top of indoor sash. This will stop air
leakage which reduces efficiency.
Models: AAC051SRA, AAC081SRA, AAC101SRA, AAC121SRA
AAC141SRA, AAC182SRA, and AAC202SRA
1
PREPARE UNIT
FOR
INSTALLATION
Unpack unit on floor next to
installation location.
Remove front attachment screw.
Screw location based on unit style.
Separate the outercase from the front
with a putty knife at the catch points
designated by the arrows.
Remove one screw securing basepan
locking bracket. Remove two screws
located in the rear of the outercase,
securing basepan to outercase
(AAC08, AAC10, AAC12). Using the
basepan handles, slowly and evenly
pull chassis out from outer case.
Note: Cover putty knife blade with
masking tape to guard against
damage of units finish. The filter is
removed in this illustration for clarity.
Caution: Never expose plastic
front or grille to extreme
temperatures.
9