Amana AAC051FRA Manual Del Propietário página 10

2
ASSEMBLE
CURTAINS/TOP
RAIL
Remove paper backing from top rail
gasket and adhere to bottom of top rail.
Install top rail with three or four 10-mm
screws depending on unit style. Slide
left-hand curtain assembly into left end of
top and bottom rails. Repeat for right-
hand curtain assembly. Fasten curtain
retainer strips to sides of outer case with
six or eight 10-mm screws depending on
unit style.
3
PREPARE
WINDOW FOR
INSTALLATION
Inspect window track, sash, and sill
for its ability to support the weight of
air conditioner.
Measure width between window
moldings to ensure Instant Mount
window mounting kit will fit window
frame. Instant Mount models are
designed for windows from 24” to
35” wide (AAC05,AAC07), 25” to 35”
(AAC08), 26” to 36” (AAC10,
AAC12), 30” to 40” (AAC14), 32” to
44” (AAC18, AAC20).
Instant Mount kit supplied with unit
is designed for mounting in most
double-hung windows without
storm windows. For installation in
window frame with storm window,
modify sill by adding wood strips to
inner and outer sills. This raises unit
and eliminates interference of storm
window frame.
4
APPLY WINDOW
SASH GASKET
Raise window sash. Measure width
of window sash, including portion
inside window track. Cut window
sash gasket to length and apply to
bottom of window sash. Cut and
apply window sill gasket.
Storm window installation
If storm window frame does not allow
adequate clearance below sill (1/2”
required), remove storm window frame
or create clearance by adding a wood
strip (at least 1 1/2” wide) along entire
width of sill. Fasten wood strip to sill
with at least three countersunk wood
screws (not supplied with kit). This
provides a smooth surface for
mounting air conditioner.
1 1/2"
Minimum
Wood
Strip
SILL
I
N
D
O
O
R
Storm Window
Frame
10
Mobile home window installation
Add wood strip (at least 1 1/2” wide)
along entire width of window sill.
Thickness of wood strip should match
height of front lip on window frame.
Fasten wood strip to sill with a
minimum of three countersunk wood
screws (not supplied with kit). This
provides a smooth surface for
mounting air conditioner.
1/2"
Must be a minimum
Minimum
of 1/2" to clear
bottom rail on unit
1 1/2"
Minimum
I
O
N
U
D
T
O
D
O
O
R
O
R
Window
Frame
Wood
Strip
O
U
T
D
O
O
R