Enerpac PUD1100B Manual Del Usuario página 5

Torque Item 15 to 25-28 in-lbs.
Torque Item 109 to 10-12 ft-lbs.
Align tube to face mesh
to allow for splash
lubrication of upper
needle bearing.
(13,5-16,3 Nm) lubricated.
(13,5-16,3 Nm) lubricated.
Set relief valve to 250-400 psi
(17,3-27,9 bar). Stake threads
after setting pressure.
Install Item 117 flush to
.010" (.25 mm) recessed
from manifold surface.
Figure 4 - Pumping Assembly
Torque Item 121 to
11-13 ft-lbs.
(15,0-17,6 Nm) lubricated.
5
Torque Item 15 to 27-31 in-lbs
(3,1-3,5 Nm).
Torque Item 109
to 10-12 ft-lbs.
(13,5-16,3 Nm)
lubricated.
Apply sealant to the top
of the reservoir before
applying the cork gasket.
Use no sealant on the
nitrile gasket.