Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION REQUIREMENTS
If you use an existing
wall sleeve,
you should
measure
its dimensions.
Install the new air conditioner
according
to these
installation
instructions
to achieve
the best
performance.
All wall sleeves
used to mount
the
new air conditioner
must be in good
structural
condition
and have a rear grille to securely
attach
the new air conditioner.
(FIG.
1)
With
the Kenmore
folding
sleeve,
you can
maintain
the best performance
of the new air
conditioner.
19-2//32"
(499 ram)
24-2q32"
(626 ram)
6 ram)
Air Conditioner
ram)
FIG. !
ELECTRICAL
SERVICE
Check your available electrical service. The power
supply available must be the same as that shown
on the unit nameplate (found on left side of cabinet).
All models
are equipped
with a 3-prong
service
plug
to provide
proper
service
and safe positive
grounding.
Do not change
plug in any way.
Do not
use an adapter
plug. If your present
wall outlet
does
not match your
plug, call a qualified
electrician
to
make the necessary
corrections.
SAVE CARTON
for storage
and this OWNER'S
MANUAL
for future
reference.
The carton
is the best way to store
unit
during
winter or when not in use.
INSTALLATION
HARDWARE
2 Size options
2 Size options
ITEM
NAME OF PARTS
Q'TY
_'1_ i
PLASTIC GRILLE
1
i
HORIZONTAL
INSULATION
STRIPS
2
i
AROUND
INSULATION
STRIPS
2
SUPPORT BLOCK
2
::BAFFLE
1
@
i
TRIM FRAME
2
i
SHIM
2
{8_ i
PLASTIC NUTS AND WASHER SCREWS
4
_B_
GRILLE REAR
I
To avoid risk of personal injury, property damage,
or product damage due to the weight of this
device and sharp edges that may be exposed:
• Air conditioners covered in this manual pose an
excessive weight hazard. Two or more people
are needed to move and install the unit.
To prevent injury or strain, use proper lifting and
carrying techniques when moving unit.
• Carefully inspect location where air conditioner
will be installed. Be sure it will support the weight
of the unit over an extended period of time.
• Handle air conditioner with care. Wear
protective gloves whenever lifting or carrying the
unit. AVOID the sharp metal fins of front and
rear coils.
• Make sure air conditioner does not fall during
installation.
REQUIRED TOOLS:
• Tight
Fitting
gloves
• Standard
screwdriver
• Phillips
screwdriver
• Pliers
• Sharp
knife
• 3/8-inch
open
end
wrench
or adjustable
wrench
• 1/4-inch
hex socket
and ratchet
• Tape measure
• Electric
drill
• 1/4-inch
drill bit
-5-
Capítulos
Tabla de contenido
