Resetting To The Factory Default Settings; Further Information - Axis 216FD Guia De Instalacion

Page 16

Resetting to the Factory Default Settings

This will reset all parameters, including the IP address, to the Factory Default settings:
1. Disconnect power from the camera.
2. Press and hold the Control button and reconnect power.
3. Keep the control button pressed until the Status Indicator displays amber (this may take
up to 15 seconds).
4. When the Status Indicator displays green (which can take up to 1 minute) the process is
complete and the camera has been reset.
5. Re-assign the IP address, using one of the methods described in this document.
It is also possible to reset parameters to the original factory default settings via the web
interface. For more information, please see the online help or the user's manual.

Further information

The user's manual is available from the Axis Web site at www.axis.com or from the Axis
Network Video Product CD supplied with this product.
Tip!
Visit www.axis.com/techsup to check if there is updated firmware available for your
AXIS 216FD/216FD-V/216MFD/216MFD-V. To see the currently installed firmware
version, see the Basic Configuration web page in the product's Setup tools.
AXIS 216FD/216FD-V/216MFD/216MFD-V Installation Guide