Storage And Troubleshooting - Workzone 47625-15 Manual Del Usuario

Dual halogen worklight with stand
STORAGE
WARNING: RISK OF FIRE. Always unplug and allow the portable
worklight to cool down completely before storing.
1. Remove portable stand from the tripod, unscrew the threaded knob and lift
portable stand.
2. To collapse tripod unscrew to loosen each collar, then lower each section of the
telescoping tube. Re-tighten each collar to hold telescoping tube in place.
3. Unscrew to loosen support knob at the junction of the tripod legs and pull up on
the legs. Re-tighten support knob to lock.
4. Store the tripod and the portable worklight in a safe place, out of reach of
children.
TROUBLESHOOTING
WARNING: RISK OF ELECTROCUTION OR SEVERE BURNS.
Always make sure that the worklight is off, unplugged and has cooled
before removing the lens cover.
If the worklight will not operate:
1. There may be a poor connection between bulb holder and bulb. Check bulb
installation.
2. Bulb needs replacement. Remove bulb and check for a break in the filament wire.
Replace bulb if necessary.
3. Improper voltage at fixture. Use of extension cords over 50 feet can reduce the
voltage supplied to the light causing dimming. Use 14-gauge (AWG) extension
cord with a cord length of less than 50 feet.
4. Improper power source. The light will operate only on standard household 120-V
AC/ 60 Hz current. Have power source checked by a qualified electrician. For
customer assistance, call 1 (866) 558-8096 Monday thru Friday 10am-6pm (ET).
AFTER SALES SUPPORT
1 866 558 8096

Storage and Troubleshooting

MODEL: 47625-15 PRODUCT CODE: 47625
11
[email protected]
05/2015