Maintenance; General Maintenance - GreenWorks GPW 2001 Manual De Instrucciones

MAINTENANCE

W A R N I N G
When servicing, use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
W A R N I N G
Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so
could result in objects being thrown into your eyes, resulting in possible serious injury.
W A R N I N G
Before inspecting, cleaning or servicing the machine, shut off motor , wait for all moving parts
to stop, disconnect unit from power supply, and pull trigger to release water pressure. Failure to
follow these instructions can result in serious personal injury or property damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
W A R N I N G
come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may
result in serious personal injury..
Only the parts shown on the parts list are intended to be repaired or replaced by the customer.
All other parts should be replaced at an authorized service center.
21