Install The Detergent Tank; Start The Machine; Stop The Machine; Maintenance - GreenWorks GPW 1501 Manual Del Operador

4.4

INSTALL THE DETERGENT TANK

6
WARNING
Do not use household detergents, acids, alkalines,
bleaches, solvents, flammable material, or industrial
grade solutions, which can do damage to the pump.
WARNING
Do the instructions on the solution bottle to prepare
detergent.
NOTE
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when
you fill it.
1. Put the detergent into the detergent tank.
2. Install the detergent tank onto the gun.
3. Turn clockwise the gun to tighten.
NOTE
Do not let detergent dry on the surface to prevent
streaks.
4.5

START THE MACHINE

English
13
1. Connect the machine to the power supply.
2. Set the power switch to the "ON" ( | ) position.
3. Turn the water supply on.
4. Pull the gun trigger.
4.6
1. Release the gun trigger.
2. Set the power switch to the "OFF" (O) position.
5
14
9
CAUTION
Do not operate without the water supply connected.
CAUTION
Before you start the machine:
1. Turn the water supply on.
2. Pull the gun trigger to release air pressure.
3. If a stable stream of water comes out from the gun,
release the gun trigger.

STOP THE MACHINE

WARNING
If you do not use the machine：
• Stop the machine.
• Turn the water supply off.
• Disconnect the power cord from the outlet.
• Pull the gun trigger to release the remaining
pressure from the machine.
• Lock the trigger safety button.

MAINTENANCE

WARNING
Before maintenance, make sure that you
• stop the machine.
• wait until all the moving parts stop.
• disconnect the plug from the power source.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Do not let brake fluids, gasoline, petroleum-based
materials touch the plastic parts. Chemicals can cause
damage to the plastic, and make the plastic
unserviceable.
WARNING
Replace the power cord by an approved service
center.
EN