DITTING 807 Serie Instrucciones De Uso página 50

COMMERCIAL COFFEE GRINDER
Problem
The grinder is • The spout is
humming but
not grinding.
• The grinding de-
• A foreign object
50 50
Cause
clogged.
gree is too fi ne.
is in the grinding
mechanism.
Remedy
Change the grinding degree
se ng to the "coarsest grinding
degree" and start the grinding
process. The grinder will clear
itself. Then, during the opera on,
set the grinding degree to the
desired se ng.
Pump the grinder's clamping lever
several mes to clear the clog.
Change the grinding degree
se ng to the "coarsest grinding
degree" and start the grinding
process. The grinder will clear
itself. Then, during the opera on,
set the grinding degree to the
desired se ng. Should the prob-
lem persist, contact your supplier
(see "Maintenance and service"
sec on).
Clean the grinding mechanism
as described in the "Cleaning"
sec on and remove the foreign
object at the same me. If the for-
eign object cannot be removed,
contact your supplier
(see "Maintenance and service"
sec on).