DITTING 807 Serie Instrucciones De Uso página 40

COMMERCIAL COFFEE GRINDER
807 LAB SWEET:
Adjust the folding table (9) to the desired height using the adjus ng screw (22)
(see Fig. H).
1. To do so, fold open the table ver cally upwards.
2. Loosen the adjus ng screw underneath the folding table and push the
table either upwards or downwards along the rail.
3. The folding table is con nuously adjustable.
A er adjus ng to the desired height, secure the adjus ng screw and fold
the table downwards.
Please note that the dispersion of the grounds depends on the
distance between the spout and the hopper:
The less the spacing, the less the dispersion of the coff ee
grounds.
807 FILTER:
Move the fi lter basket holder (11) to the desired posi on using the adjus ng
screws (24, 25) (see Fig. I).
1. Loosen the adjus ng screw of the fi lter basket holder in the middle and
push the holder (8) upwards or downwards along the rail.
The fi lter basket holder is con nuously adjustable.
2. A er adjus ng to the desired height, secure the fi lter basket holder adjust-
ing screw.
3. Loosen the adjus ng screws on both sides of the arms of the fi lter basket
holder.
4. Adjust the arms symmetrically according to the size of the fi lter holder and
secure the adjus ng screw on both sides.
5. If the fi lter holder has a wide rim, e.g. made of plas c, loosen the adjus ng
screw of the fi lter basket holder in the middle and pull up the holder to
remove it from the top.
6. Rotate the holder 180° degrees and put it on the rail.
7. A er adjus ng to the desired height, secure the adjus ng screw.
Move the spout guide (10) from the bo om to the top using gentle pressure. The
spout guide will lock into the defi ned posi on by means of the locking mechanism.
40 40
To prevent the fi lter holder slipping out and/or to reduce
vibra on noise, place one O-ring in each of the notches
(26) on the fi lter basket holder arms.