Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Sliding Latch Plate and ELR Retractor
A latchplate that slides freely on the belt
webbing and cannot, by itself, hold the belt
snug around a car seat.
With this retractor, you will need to use the
locking clip to lock the vehicle seat belt.
To get a locking clip order online at
gracobaby.com or call 1-800 345-4109
Route the vehicle seat belt through the
Locking Clip
proper belt path and buckle it in. Pull the
vehicle seat belt tight. While pushing down
1" (2.5 cm)
on seat, pinch the two straps together
behind the buckle tongue. Unbuckle the belt
without allowing it to slip.
Attach locking clip to lap and shoulder belts
as shown.
Rebuckle belt. Check that lap belt does not
move by pulling hard. If belt loosens or
lengthens, repeat procedure.
84
Tabla de contenido
