Mounting; Tower Mounting - Tripp-Lite SmartPro 3U Manual Del Usuario

Ocultar thumbs Ver también para SmartPro 3U:
Idiomas disponibles

Idiomas disponibles

200807051 93-2460 Smart 3U 230V OM.qxd

Mounting

Mount your equipment in either a 4-post or 2-post rack or rack enclosure. The user must determine
the fitness of hardware and procedures before mounting. If hardware and procedures are not suit-
able for your application, contact the manufacturer of your rack or rack enclosure. The procedures
described in this manual are for common rack and rack enclosure types and may not be appropriate
for all applications.
4-Post Rack Mounting
Loosen the wingnuts
1
side supports
; adjust the length of the supports to
B
match the depth of your rack; tighten wingnuts. Mount
both side supports in the lowest space of your rack on
the inside surfaces of the rails with user-supplied #10-
32 rack bolts and washers
ledges should face inward. The side supports' front
and back holes are threaded and do not require nuts to
secure rack bolts.
Attach mounting ears
2
of your UPS
E
ears should face forward.
Using an assistant if necessary, lift your UPS and slide
3
it onto the mounting shelves (if your model includes
the shelves). Attach your UPS to the rack by using the
appropriate hardware
and into the rack rails.
2-Post Rack (Telecom) Mounting
If you mount 3U UPS models in 2-post racks, they require
the addition of a Tripp Lite 2-Post Rackmount Installation
Kit (model: 2POSTRMKITWM, sold separately). See
Installation Kit owner's manual for installation procedure
for 3U UPS models.

Tower Mounting

If you tower mount this UPS, it requires the addition of a
Tripp Lite 2U to 9U tower stand (model: 2-9USTAND, sold
separately). See owner's manual for installation procedure.
Rotate the power module's Control Panel to view it easier
while the UPS is tower mounted. Insert a small screwdriver,
or other tool, in the slots on either side of the Control Panel.
Pop the panel out; rotate it; and pop the panel back into place.
8/8/2008
on each of the two adjustable
A
. Note: Both support
C
to the front mounting holes
D
using the screws provided
through its mounting ears
G
3
10:10 AM
Page 3
C
C
1
E
. The
F
D
2
G
3
C
C
A
A
B
B
F
loading

Este manual también es adecuado para:

Smx5000xlrt3u