Troubleshooting Procedures - Kohler K-1110 Manual Del Usuario

Bañera con inyectores de aire
Ocultar thumbs Ver también para K-1110:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Air Flow Mode
Activates Mode Selected
Rotate Outer Ring to
Access Desired Mode
Power On/Off
Chromatherapy Specific
Color (if provided)

1. Troubleshooting Procedures

This troubleshooting guide is for general aid only. A Kohler Authorized Service Representative or qualified
electrician should correct all electrical problems. For warranty service, contact your dealer or wholesale
distributor.
Troubleshooting the Bath System
Symptoms
1. User keypad does not
illuminate when power button
is pressed or the outer ring is
rotated.
2. Ground-Fault Circuit-
Interrupter (GFCI) or
Earth-Leakage Circuit-Breaker
(ELCB) trips when unit is
turned on.
Kohler Co.
Zone 1
Rotating Ring Key Pad
Probable Causes
A. No power to control.
B. Ground-Fault Circuit-
Interrupter (GFCI) or
Earth-Leakage Circuit-Breaker
(ELCB) tripped.
C. Wiring harness from user
keypad to control is loose,
disconnected or damaged.
D. User keypad does not work.
E. Control does not work.
A. Electrical harness is wet or
damaged.
B. Electrical wiring to the junction
box is wet or damaged.
Zone 2
Zone 3
Chromatherapy Cycle
(if provided)
Recommended Action
A. Check wiring and connect
B. Reset GFCI or ELCB. If it trips
C. Check wiring for proper
D. Replace the user keypad. Refer
E. Replace the control. Refer to
A. Check for wet connections. Dry
B. Have a qualified electrician
11
Surge Mode
Increase Flow or Surge
Indicator Bar
Decrease Flow or Surge
Purge Mode
power.
again, refer to "Ground-Fault
Circuit-Interrupter (GFCI) or
Earth-Leakage Circuit-Breaker
(ELCB) trips when unit is
turned on".
connections. Replace the wiring
harness if necessary. Refer to
your installer or wholesale
dealer.
to your installer or wholesale
dealer.
your installer or wholesale
dealer.
the connections and repair the
leak. Check for insulation or
connector damage. Replace the
harness if damaged. Refer to
your installer or wholesale
dealer.
diagnose and correct the
problem in accordance with
applicable building and
electrical codes.
1038364-5-A
Tabla de contenido
loading

Tabla de contenido