Problem
The Vacuum Sealer is
not vacuuming canisters
properly
In seldom cases some
of the programs may
be error and lead to
that the machine cannot
work well
CLEANING AND CARE
• Unplug before cleaning.
• Regularly clean appliance with damp cloth and mild soap to remove crumbs, dust,
debris.
• Chamber Seal Gasket is removable to clean any liquids that may have escaped
from Vacuum bag during process.
Suggested Solution
The accessory hose may not be properly attached. Ensure
the hose is completely inserted into the lid of the canister
and the accessory port and try again.
Make sure the canister lid is turned to the "Vacuum"
setting (In Marinate Mode to "Open" setting).
Leave adequate head space at the top of the canister.
Make sure there isn't any damage to the canister and lid.
Sometimes hairline cracks can develop in canisters. When
this happens the canister is no longer air tight and should
be discarded.
Twist knob on lid of canister to make sure it is attached
securely.
Cut the electricity then re-connect it.
EN
41