Briggs & Stratton 26CC Manual Del Usuario página 10

Connect the spray hose assembly and the
pump outlet
1. Attach the spray hose to the pump outlet (A) by tighening
the wing nut (B). Tighten by hand only as overtightening may
damage hose fittings.
A
Connect the spray hose assembly and spray
wands.
1. For 3 nozzle spray wand: Screw the extension rod (D) onto
the cock valve (C). Screw the 3 nozzle spray wand (E) onto the
extension rod (D). Ensure all connections are secured. Tighten
by hand only.
2. For single nozzle wand: Screw the single nozzle wand (F)
onto the cock valve (C). Ensure the connection is secured. The
single wand is equipped with the flow adjustment. Tighten by
hand only.
NOTE: If there is a leakage from the single nozzle wand (F)
fittings, retighten the fittings with a spanner or multigrip.
10
B
ENGLISH
E
D
C
3 nozzle spray wand
3. After the spray hose assembly is connected with the spray wand,
inspect and ensure all connections in the spray hose assembly
such as the seals (G), cock valve (H), handle (I) and spray hose (J)
are tighly secured (hand tighten only).
H
I
J
F
C
Single nozzle spray wand
G