Tabla de contenido
Idiomas disponibles
Idiomas disponibles
iPod
In these Operating Instructions, "iPod" is
used as a general reference for the iPod
functions on the iPod and iPhone, unless
otherwise specified by the text or
illustrations.
For details on the compatibility of your
iPod, see "About iPod" (page 20) or visit the
support site on the back cover.
Playing back iPod
Before connecting the iPod, turn down the
volume of the unit.
1
Connect the iPod to the USB connector
with the USB connection cable for iPod
(not supplied)*.
* Using the RC-100IP USB connection cable
for iPod is recommended.
The tracks on the iPod start playing
automatically from the point last played.
If an iPod is already connected, to start
playback press
repeatedly until "USB" appears. ("IPD"
appears in the display when iPod is
recognized.)
Press and hold for 1
second to stop playback.
To remove the iPod, stop the iPod playback,
then remove the iPod.
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by iPhone itself. In order to
avoid sudden loud sound after a call, do not
increase the volume on the unit during a
telephone call.
Note
Do not detach the front panel during playback of
the iPod, otherwise data may be damaged.
Tip
iPod is recharged while the unit is turned on.
Resuming mode
When the iPod is connected to the dock
connector, playback starts in the mode set
by the iPod. In this mode, the following
buttons do not function.
– (REP)
– (SHUF)
Changing display items
Press .
Note
Some letters stored in iPod may not be displayed
correctly.
Skipping albums, podcasts,
genres, playlists and artists
To
Do this
Press / (ALBUM /
Skip
) [press once for each]
Press and hold /
Skip
(ALBUM /)
continuously
[hold to desired point]
11
Capítulos
Tabla de contenido
Solución de problemas
