Pair Remote - Ergomotion Serta Motion Essentials Manual Del Propietário

pair remote

Remote Pairing
The original remote that comes in the box is already paired to the adjustable base . No further action is required . In the event
that the remote is not paired with the base, follow the steps below .
STEP 1
Unplug the Power Cord from your power outlet . Wait 1
minute, then plug it back in to your power outlet . Perform
Step 2 within 10 seconds, while the control box light is
flashing.
Power Supply
STEP 2
Press and hold the PAIR button on
the back of the remote . The PAIR
button will illuminate and start
to flash. When the PAIR button
stops flashing, the LED light on
the control box will stop flashing.
Release the PAIR button .
Power Cord
STEP 3
The remote is now paired to the adjustable base . Test all
remote functions . If the remote buttons do not impact the
adjustable base movements, please repeat the process
again .
11