How To Use The Detergent Injector - Landa ZC3-15321 Manual Del Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ZC SERIES PRESSURE WASHER
HOW TO USE THE
DETERGENT INJECTOR
WARNING: Some detergents may
WARNING
be harmful if inhaled or ingested,
causing severe nausea, fainting or
poisoning. The harmful elements
may cause property damage or
severe injury.
SOME DETERGENTS
The machine can siphon and mix de-
MAY BE HARMFUL IF
INHALED OR
tergents with the use of Landa's de-
INGESTED
tergent injector kit.
1. Turn engine and water supply off. Squeeze spray gun
to relieve pressure before attaching detergent injector.
2. To attach detergent injector between pressure washer
and high pressure hose, pull injector quick coupler col-
lar back and secure on discharge nipple. Injector valve
body arrow should point in direction of flow.
Detergent Bucket
(not included)
Quick
Coupler
Pump
High Pressure Nozzle
Soap Nozzle
LANDA ZC • REV. 5/02
OPERATOR'S MANUAL
3. Connect pressure discharge hose to injector nipple
securing quick coupler by pushing collar towards nipple.
4. Start machine as outlined in Operating Instructions.
5. Place detergent pick-up tube into container of deter-
gent solution.
6. Insert soap nozzle into quick coupler.
7. Open spray gun. Water detergent ratio is approxi-
mately 15 to 1.
8. For clean up, place detergent pick-up tube into con-
tainer of clear water and follow steps 5 to 7 to pre-
vent detergent deposits from damaging the injector.
9. If your machine has a variable pressure wand, to
wash, turn the pressure control handle counterclock-
wise to lower the pressure. This directs the water
flow through the soap nozzle and allows the deter-
gent injector to siphon soap. To rinse with high pres-
sure water, simply turn the control handle clockwise.
NOTE: The detergent injector will not siphon deter-
gent with high pressure.
Discharge
Nipple
Detergent
Injector
Water
Inlet
Detergent
Pick-up Tube
Wand
Trigger
7
High Pressure
Hose
Spray
Gun
Tabla de contenido
loading

Tabla de contenido