auna Connect System S Manual Del Usuario página 51

Auto update
Set format
Set timezone
Daylight savings
The default auto time update setting is "Update from Network". If you would
like to manually set the time, it is recommended to turn the Auto update
function off.
Language
1. During System settings mode, press the  / buttons to select
Language and then press the ENTER button to confirm.
2. Press the / buttons to change the display language of your choice.
3. Press ENTER to confirm.
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national
DAB+ stations in that area, your previously tuned channels may no longer
be available.
1. During System settings mode, press the / buttons to select "Factory
reset", and press the ENTER button to confirm.
2. Press the / buttons to select Yes, and press the ENTER button to
7 8
confirm or select No to cancel.
After the system reset, all the tuned stations, Internet, DAB & FM preset
stations will be erased.
Update from DAB / FM / Network or No
update.
12 / 24 hour format.
Select a time zone. (Only available when
Auto update from Network is on.)
Select daylight savings. (Only available
when Auto update from Network is on.)
EN
51