Hole Punch Mode - Kyocera DF-650B Guía De Uso

English
4
5
1
1-12
Copies will be automatically stapled and
ejected onto the storage cover.
If the maximum capacity is reached, a
message displays. Remove all copies from
the storage cover to continue.
NOTE:
For further information refer to Center-Folding Unit (option) on page 1-33.
On completion of the job, remove the copies
from the storage cover.

Hole Punch Mode

The Hole Punch Unit is an optional device.
This mode produces hole punched copies
automatically.
The following paper sizes can be used:
• 2-hole punch: A3, B4, A4, A4R, B5,
B5R, A5R, Folio, 8 1/2 x 14" (Legal),
8 1/2 x 11" (Letter) and 5 1/2 x 8 1/2"
• 3-hole punch: 11 x 17" and 11 x 8 1/2"
• 4-hole punch: A3 and A4
Hole Punch mode can be used with Sort: ON, Staple and Sort: OFF modes. Paper
weights must be between 45 g/m
NOTE:
B5R can only be selected if copies are ejected onto Tray A. In Sort: ON
mode and Staple mode, B5R and Folio cannot be selected.
Select Hole Punch mode on the operation panel of your copier.
NOTE:
Refer to the Operation Guide for your copier for more detailed information.
DF-650(B), MT-1(B), BF-1(B), PH-4(A) AND PH-4(C) OPERATION GUIDE
2 2
and 200 g/m .