brondell REVIVE PR50-W El Manual Del Propietario página 28

HUMIDIFIER MAINTENANCE (cont.)
CLEANING THE HUMIDIFIER COMPONENTS (cont.)
2. Cleaning the Water Tray
a. Remove the Water Tank and set it aside. If you also
need to clean the tank, follow the steps on page 25.
b. Remove the Humidifier Filter from the Water Tray and
set it aside (see Step 3 below if you need to also clean
the Humidifier Filter).
c. Lift the Humidifier Filter Tray from the Water Tray, and
clean them both with a soft cloth under running water.
Use a neutral detergent. Do not use abrasives.
d. Ensure that the Water Tray and Humidifier Filter Tray
are completely dry before reassembling. Place the
Humidifier Filter Tray back onto the Water Tray.
If the Humidifier Filter Tray is not properly seated,
leaking and product malfunction may occur.
3. Cleaning the Humidifier Filter
a. Fill a large bowl with lukewarm water. It will be used as
a bath for Humidifier Filter.
b. Remove the Humidifier Filter from the Water Tray and
place it in the water bowl from the previous step.
c. Leave the Humidifier Filter in the water bath for 20
minutes, and then gently wash it with a soft brush, cloth,
or sponge.
NOTE: If there is a white build-up of scale on the
Humidifier Filter, run it under warm water while
you wash it with the a soft brush or cloth.
d. Place the Humidifier Filter Tray back onto the Water
Tray. Ensure that the Water Tray and Humidifier Filter
Tray are completely dry before reassembling.
If proper cleanliness of the Humidifier Filter is not maintained, the Revive may start
giving off an odor. Proper maintenance of all the Humidifying Components is vital to the
Revive's performance and sanitation.
26
Step 2b
Step 2c
Step 3b
Step 3c