Automatic Humidity Control; Fan Speed - brondell REVIVE PR50-W El Manual Del Propietario

OPERATING MODES (cont.)
Allergen Mode
Allergen Mode is a three-step process by which the Revive's fan speed
is maximized and then throttled-down over a period of time in order to
purify a large amount of air in the least amount of time. Below are the
steps and their durations:
Step 1: Ten minutes at Fan Speed 5
Step 2: Five minutes at Fan Speed 4
Step 3: Five minutes at Fan Speed 3
The timing and fan speed are pre-determined and do not change with
a change in air quality, unless you intervene to change to a new
Operating Mode.
After these steps have concluded, the Revive will switch to Auto Mode.
Fan Speed Mode
This can also be referred to as Manual Mode. Select the Fan Speed
at which you want the Revive to operate, and the fan speed with stay
constant, regardless of changes to the air quality in the room.

AUTOMATIC HUMIDITY CONTROL

1. In Auto Mode and Eco Mode, the fan speed will change according to a combination of
humidity and air quality sensor readings. These combinations, and their resulting fan
speeds, are outlined below.
NOTE: Automatic Humidity Control will only work if the Water Tank contains water and is
seated correctly.
HUMIDITY
Humid or
Moderate
Dry
AIR QUALITY & INDICATOR COLOR
Level 1 – Blue
Level 2 – Violet
Level 3 – Red
Level 1 – Blue
Level 2 or 3 – Violet or Red

FAN SPEED

2
3
4
3
4
17