Above-Floor Cleaning - Shark NV370 Guia Del Usuario

Above-Floor Cleaning

Fig. 16
CLEAN ABOVE THE FLOOR IN UPRIGHT VAC
OR PORTABLE LIFT-AWAY
1
Press the handle release button and pull the handle
up or press the extension wand release button and
pull the extension wand up.
2
Attach desired accessory onto the end of either the
extension wand or the handle. (Fig. 16)
3
Your vacuum has tremendous suction power.
Adjust the amount of suction with the suction
release on the handle. Open the valve (a) by
rotating the collar 90˚ counterclockwise for
low suction when doing light jobs such as
drapes or fine surfaces. Close the valve (a)
by rotating the collar clockwise 90˚ for high
suction and when using the hand held power
brush. (Fig. 16-a)
a
Suction
Release Collar
MODE
®
Release suction when
dusting delicate
objects, furniture or
draperies.
4
Press the On/Off switch to the "I" position to turn
the vacuum on for above-floor cleaning.
IMPORTANT: Ensure vacuum is in upright position.
Do not use position "II" when cleaning above the
floor in the upright vac mode as this will engage
the motorized floor brush. The rotating brush may
damage your floor if run for a prolonged period of
time in one area.
www.sharkclean.com 15