Using Basic Functions; Setting Up The Tv - Sony TRINITRON WEGA KV-27FV310 Manual Del Usuario

Using Basic Functions

Setting Up the TV

After you have finished connecting your TV, you can use Auto Program to set up your
channels. During Auto Program, the TV will automatically search for available channels and
program receivable channels.
1
Press to turn on the TV. The Initial Setup screen appears.
2
Press on the remote control or on the TV front panel to start Auto Program, or press
to exit.
✍
The Initial Setup screen appears each time you turn on the TV until you perform Auto Program.
To perform Auto Program again
1
Press .
2
g
Press to highlight Channel Setup Menu.
3
f
Press to highlight Cable. Press
4
F f
Press or to highlight On or Off according to how you connected your TV. Press
select.
5
f
Press to highlight Auto Program. Press
6
After Auto Program finishes, press
To reset the TV to factory settings
1
Turn the TV on.
2
Hold down
3
Press and release the POWER button on the TV front panel. The TV will turn itself off,
then back on.
4
Release .
Initial Setup
Auto Program: [CH+]
Exit:
First please connect
cable/antenna
on the remote control.
[CH–]
to select.
to search for channels.
to exit.
to
23