Accessory Parts And Parts To Be Procured Locally - Toshiba MMK-AP0071H Manual De Instalación

Accessory parts and Parts to be procured locally

Accessory parts
Part name Q'ty Shape
Installation This
1
Manual manual
Heat
2
insulating pipe
Wood screw
12
M4 × 35L
Installation
1
plate
Refrigerant piping
• Piping material used for the conventional refrigerant
cannot be used.
• Use copper pipe with 0.8 mm or more thickness for
Ø6.4, Ø9.5, Ø12.7.
Use copper pipe with 1.0 mm or more thickness for
Ø15.9.
• Flare nut and flare works are also different from those
of the conventional refrigerant. Take out the flare nut
attached to the indoor unit of the air conditioner, and
use it.
Parts to be procured locally
Connecting pipe (Liquid side)
(6.4mm (diam.), Nominal (diam.) 1/4" thick 0.8mm)
MMK-AP0071H to MMK-AP0181H
(9.5mm (diam.), Nominal (diam.) 3/8" thick 0.8mm)
MMK-AP0241H
Connecting pipe (Gas side)
(9.5mm (diam.), Nominal (diam.) 3/8" thick 0.8mm)
MMK-AP0071H to MMK-AP0121H
(12.7mm (diam.), Nominal (diam.) 1/2" thick 0.8mm)
MMK-AP0151H to MMK-AP0181H
(15.9mm (diam.), Nominal (diam.) 5/8" thick 1.0mm)
MMK-AP0241H
Power supply cord
2
Cable 3-core 2.5mm , in conformity with Design 60245 IEC57
Usage
(Be sure to hand over to customers)
For heat insulation of pipe
connecting section
For attach the installation plate
Used install indoor unit wall unit
Part name Q'ty Shape
Installation
1
pattern
Screw cap 4
Banding band 4
<Separate sold parts>
Part name Q'ty
Standard wired
1
remote controller
1
Usage
— For confirmation of piping hole
and indoor unit position
Cover on fixing screw at side plate
Used to fix attached pipe heat
insulating material
Shape Usage
Model
RBC-AMT21E