Silca Easy Scan Plus Manual Del Usuario página 19

Air4
Remotes Programming So ware
English
Select the Brand and Model for the radio control to be generated and click on Generate , The
so ware automa cally opens the "Radio Parameter Management" menu which shows the push bu ons
generated automa cally.
From this moment the radio control can be wri en, or the automa cally generated values can be edited
using the func ons: "Radio Parameter Management", "Push Bu on Order Management", etc.
2.6 GENERATING AND COPYING RADIO CONTROLS WITH DIP SWITCH
This func on is used to generate certain fi xed code radio controls with DIP switch. This is very useful if the
original radio control is damaged, worn or not working.
When this is the case the DIP switch icon appears in the Generable column of the "Air4 Radio
control Guide" menu.
Select the Make and Model for the radio control to be generated and click on DIP switch .
The so ware opens the DIP switch confi gura on menu which shows photos (Area 1) to indicate the type of
dip switch and its loca on on the original radio control.
Open the radio control shell, fi nd the dip switch and confi gure the dip switch diagram as the one to be
copied, as shown in the fi gure below.
Press Save to con nue.
From this moment the radio control can be wri en, or the automa cally generated values can be edited
using the func ons: "Radio Parameter Management", "Push Bu on Order Management", etc
Copyright Silca S.p.A 2018 19