Silca Easy Scan Plus Manual Del Usuario página 13

Air4
Remotes Programming So ware
English
1. AIR4 REMOTE CONTROL GUIDE
This menu enables a remote control to be searched for within the Silca database, by using the search param-
eters described below.
The window has 3 Areas:
Area 1: area for se ng the remote control search parameters;
Area 2: area for viewing the list of available remote controls;
Area 3: area for viewing the image of the selected remote control.
Descrip on of the search parameters in Area 1:
Brand: enables remotes to be searched by brand;
Model: enables remotes to be searched by model;
Frequency: enables remotes to be searched by frequency;
Modula on: enables remotes to be searched by modula on type (AM or FM);
Type of remote: enables remotes to be searched by remote control type (FIXED CODE, ROLLING CODE,
ROLLING SECURE LEARNING);
Generable: enables remote controls which can be generated to be searched for;
The icon starts searching for remote controls according to the parameters that have been set;
The icon deletes any previously-set parameters.
The icon starts searching for an original remote control in the Silca database, a er having acquired a
bu on from the original remote. This window will immediately open:
The icon starts searching the Silca database for all remote controls which are compa ble with the
original one which has just been read.
Copyright Silca S.p.A 2018 13