Control Panel Features - LG Steam Dryer DLEX7177WM Guía Del Usuario E Instrucciones De Instalacion

CONTROL PANEL FEATURES

Following are instructions for starting and using your new dryer. Please refer to specific sections
of this manual for more detailed information. Important Warning: To reduce the risk of fire,
electric shock, or injury to persons, read this entire manual, including the Important Safety
Instructions, before operating this dryer.
1
POWER ON/OFF BUTTON
1
Press to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE: Pressing the ON/OFF button during
a cycle will cancel that cycle and any load
settings will be lost.
2 CYCLE SELECTOR KNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will be shown in the display.
On MANUAL DRY cycles, these settings can be
adjusted using the cycle setting buttons anytime
before starting the cycle.
3 START/PAUSE BUTTON
Press this button to START the selected
cycle. If the dryer is running, use this button
to PAUSE the cycle without losing the
current settings.
NOTE: If you do not press the START/PAUSE
button to resume a cycle within 4 minutes,
the dryer automatically turns off.
MORE TIME/LESS TIME BUTTONS
4
To adjust the drying time, use these buttons
with MANUAL DRY, TIME DRY, and STEAM
FRESh cycles, as well as the REDUCE STATIC
™
and EASY IRON options. Press the MORE TIME
button to increase the selected manual cycle
time by a minute; press LESS TIME to decrease
the cycle time by a minute.
8
3
2
6
4
5
CYCLE SETTING BUTTONS
5
Use these buttons to select the desired cycle
settings for the selected cycle. The current
settings are shown in the display. Press the
button for that option to view and select
other settings.
TIME AND STATUS DISPLAY
6
The display shows the settings, estimated
time remaining, options, and status
messages for your dryer.
OPTION BUTTONS
7
The OPTION buttons allow you to select
additional cycle options. Certain buttons
also allow you to activate special functions
by pressing and holding the button for
3 seconds.
For detailed information about the individual
options, please see the following pages.
USEFUL STEAM FUNCTIONS
8
During the STEAM FRESh
selecting Steam options, the swirl nozzle
injects fabrics with hot steam to refresh,
reduce static, and help make ironing easy.
4
7
cycle and when
™
2