T-Fal IS5200 Instructivo De Operación página 20

Central de vapor
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

1800121329 IS5200 T-FAL_105x148,5 25/10/10 08:45 Page20
- Burns could occur from touching hot metal parts, hot water or steam. Use
care when you empty a steam appliance, there may be hot water in the tank
or inside the appliance.
- For water in water tank only and remove the water tank only when it is
empty.
- Never drop or insert any object into any opening or hose.
- Always keep the hose and nozzle elevated above the water tank.
- Steam only in an up and down vertical motion. Never use steamer in a hori-
zontal position or tilt into a backward position, this may result in hot water
discharge.
- Do not place the steam nozzle directly on any surface or the appliance power
cord while it is hot or plugged in. Use the stand provided.
- Use caution when changing attachments, as they may contain hot water
from condensation. Ensure the attachments are cooled off to avoid contact
with hot water.
- The use of accessory attachments other than those provided by T-fal is not
recommended and may result in fire, electric shock or personal injury.
- This unit is for indoor use only.
SPECIAL INSTRUCTIONS
- To avoid a circuit overload, do not operate another high wattage appliance
on the same circuit.
If an extension cord is absolutely necessary, a 15-amp rated cord should be
used. Cords rated for less amperage may overheat.
Care should be taken to arrange the cord so that it cannot be pulled or tripped
over.
SAVE THESE INSTRUCTIONS
ENVIRONMENTAL PROTECTION FIRST !
i
Your appliance contains valuable materials which can be recovered
or recycled.
When disposing of it, take it to a collection point or an approved
service center.
20
Tabla de contenido
loading

Tabla de contenido