After Use - T-Fal IS5200 Instructivo De Operación

1800121329 IS5200 T-FAL_105x148,5 25/10/10 08:45 Page24

After use

Warning : Never touch
the steam head until it
has cooled down
completely.
Cleaning
• Clean the main unit with a damp cloth. To maintain
maximum performance, your steamer must be descaled
occasionally. The time between descaling operations
depends on the quality of the water and the frequency
with which you use the appliance. The appliance must
be descaled at least once a year or after 50 hours of
use.
• To carry out a descaling operation, follow the
following steps:
1. Ensure that the appliance has cooled down
completely.
2. Fill the water tank with fresh water and place it on
the main unit allowing water to fill the boiler.
3. Remove the tank from main unit and empty the
water from the boiler through the same way the
water goes inside.
4. Repeat step 2 and 3 several times until the scale
has been removed.
Tips
• We recommend checking the garment care label for manufacturer
recommendations before steaming. We also recommend testing the garment
on an unobtrusive area such as an inner seam.
• After using the steamer, switch the power off by
holding down (3 sec.) the Set/Off button. Once the
power indicator light turns off, you can unplug the
appliance.
• Hang the steam head in an upright position on the
hook when not in use.
• Turn the hanger vertically if you want to easily store
the appliance away.
• Empty and rinse the water tank each time before
storage in order to flush out any scale particles -
• Wrap the cord around the power cord clips -
• Do not carry the steamer by the water tank handle.
This appliance includes luggage style wheels for
added convenience when transporting.
24
fig.20.
fig.21.
CAUTION: Don't fill
the boiler by the
steam head holes !
Never immerse the
steam head in water !
The steam handle
contains electronic
components that
could be damaged by
direct water.