Safety Notes; Installation Instructions; Technical Data; Symbol Description - Hansgrohe Raindance S 180 1jet 27471000 Instrucciones De Montaje

Safety Notes

Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
The arm of the shower head is intended only to hold
the shower head. Do not load it down with other
objects!
Children as well as adults with physical, mental and/
or sensoric impairments must not use this product
without proper supervision. Persons under the
influence of alcohol or drugs are prohibited from
using this product.
Do not allow the streams of the shower touch
sensitive body parts (such as your eyes). An
adequate distance must be kept between the shower
and you.

Installation Instructions

• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply
the product and has no weak points.
• The filter insert must be used to protect the shower
against incoming dirt by pipework. Incoming dirt
leads to defects or/and can damage parts of the
shower; such caused faults voids all liability and
guarantee claims.
4
English
Wall mount (see page 32)
Ceiling mount (see page 34)

Technical Data

Operating pressure:
Recommended operating pressure:
27471000, 27468000, 27474000,
27472000, 27477000:
27476000, 27478000:
27492000, 27493000, 27494000:
Hot water temperature:
Thermal disinfection:
The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!
Cleaning (see page 36)
Dimensions (see page 40)
Flow diagram (see page 40)
Spare parts (see page 45)
XXX = Colors
000 = Chrome Plated
130 = Polished Bronze
300 = Polished Redgold
330 = Polished Black Chrome
340 = Brushed Black Chrome
820 = Brushed Nickel
830 = Polished Nickel
930 = Polished Brass
Operation (see page 46)
max. 0,6 MPa
0,1 - 0,4 MPa
0,12 - 0,4 MPa
0,15 - 0,4 MPa
(1 MPa = 10 bar = 147 PSI)
max. 60°C
max. 70°C / 4 min