THERMEx TX MOTOR Instrucciones De Montaje página 47

M P528217000011102016
INSTALLATION
TX motor is available in two models:
• TX motor ceiling (P528.21.7000.0)
• TX motor wall (P528.19.9108.0)
The motors are sold to be fitted with a Thermex range hood. Always follow these instructions
and the installation instructions for the range hood carefully to ensure correct installation.
NOTE: DO NOT use common zero when installing the range hood and the TX motor, as this will affect
the hood control.
NOTE: Always use the original dimensions of the outlet. Reducing the vent size decreases perfor-
mance and increases the noise level.
CEILING INSTALLATION
TX motor ceiling (P528.21.7000.0), is mounted in the outlet installation in the following way:
1
Install the motor on the two legs with the
bolts. Tighten the nuts at the back of the
legs.
NOTE: The motor can be turned with the
air outlet upwards or sideways. It must not
be turned downward because the non-re-
turn valve will not be able to function.
THERMEX TX MOTOR 47
2
Place the motor in the condenser housing.