Transmission; Band Selector; Frequency Band Chart - Midland 200 Manual Del Usuario

but will not be disturbed by noise on the channel between signals.
When properly set, the Squelch keeps the receiver "dead" until a signal comes in on that
channel. However, do not set the Squelch too high, otherwise weak signals will not be able to
open the Squelch circuit. To receive very weak signals, it is best to leave Squelch set to the mi-
nimum position by rotating the control maximum counterclockwise. The Squelch circuit in your
Transceiver is an advanced design. It uses an operational amp IC to accomplish a hysteresis
action. The result is that when you set the Squelch for a precise signal level, if that signal level
increases or decreases in strength, the Squelch circuit will follow this change. With conventio-
nal Squelch circuit, often a signal which changes strength get "chopped" by the Squelch circuit
and you lose a portion of the message.
With a hysteresis Squelch, you get it all.

TRANSMISSION

The emission switch (4W FM - 4W AM - 1W AM) allows you to select the power and modulation.
once you set such selections, follow these steps:
1. Select the desired channel.
2. Press the push-to talk button on the microphone and hold it an angle about 5-7 cm from your
mouth and speak in a normal voice.
3. To receive, release the push-to-talk button.
Be sure the mic plug is firmly connected to the jack.
NOTE: shouting into the mic will not increase your power or signal. An internal circuit automatically
sets the mic signal for maximum modulation, so speaking loudly will give no advantage.

BAND SELECTOR

The PL/EU selector allows you to switch to PL (Polish) or EU (Europe) bands.
PL (Poland): 40 CH AM/FM 4W; 26.960-27.400MHz
EU (Europe): 40 CH FM 4W/40 CH AM 1W; 26.965-27.405MHz
Frequency
I Fx 26,965 - 27,405 MHz
E Fx 26,965 - 27,405 MHz
EC Fx 26,965 - 27,405 MHz
EU Fx 26,965 - 27,405 MHz 40CH FM 4W 40CH AM 1W
F Fx 26,965 - 27,405 MHz 40CH FM 4W 40CH AM 1W
PL Fx 26,960 - 27,400 MHz

FREQUENCY BAND CHART

Frequency band
40CH AM/FM 4W
40CH AM/FM 4W
40CH FM 4W
40CH AM/FM 4W
6 6
Band selector Emission mode
switch
EU 4W FM / 4W AM
EU 4W FM / 4W AM
EU 4W FM
EU 4W FM / 1W AM
EU 4W FM / 1W AM
PL 4W FM / 4W AM