Cleaning And Maintenance - Krups Pump espresso Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

1. The appliance

„ Unplug (J) before each clean and let the appliance cool down first.

„ Clean the outside of the appliance with a damp sponge when you think it necessary.

Regularly clean the tank, drip tray and its grill then wipe them down.

„ Rinse the inside of the tank regularly.

„ When a fine white layer appears in the tank, descale the appliance (refer to the section

on descaling)

„ Do not use alcohol or solvent-based cleaning products.

„ After unplugging the appliance, regularly clean the head of the filter holder and the seal

(E) using a damp sponge.

„ Clean with a damp cloth only. Do not use detergent or abrasive products.

2. The filter holder

„ Using a damp cloth, regularly clean the filter holder housing in order to remove any

residual coffee that may have collected in this area.

„ Do not remove the seal. Do not remove the screws from the filter and filter holder.

This may only be carried out by an approved servicing centre.

„ To prolong the life of the filtering head seal, do not refit the filter holder if the coffee

machine will not be used for an extended period of time.

3. The drip tray

„ If necessary, clean the drip tray (I) and its grill (H) using water and a little mild detergent

(44-45). Rinse and dry.

Descale your appliance regularly, as indicated in sections A and B for the coffee and steam

functions, as this will help prolong its lifespan. The frequency of descaling depends on the

hardness of your water. Consult your water supply authority for more information.

While descaling, do not place your appliance on a marble worktop. The descaling agent

could damage it.

„ To help you, here is a table of reference for the frequency of descaling according to water

hardness and how often your machine is used:

Average no. of coffees per

week

Less than 7

7 - 20

More than 20