Kathrein UFO 331/TP Manual Del Usuario página 19

1.4 Selecting the input symbol rate
A 1236
MS/s
27.500
Outp. S21
8 MHz
The input symbol rate is selected using the "<" and ">" buttons.
The input symbol rate can be adjusted continuously from 2.0 MS/s to 45 MS/s (DVB-S) or 2.0 MS/s to 30 MS/s (DVB-S2) in 0.1 MS/s
steps using the "+" and "-" buttons.
The digits can also be entered individually to an accuracy of 0.001 MS/s:
• Press the "Change setting mode" button
• The fi rst digit fl ashes and can be input directly using the numeric pad on the keyboard
• After the fi rst digit has been input, the second fl ashes, and so on
• To make a correction, press the "Back" button to skip one place to the left
• After the last digit has been set, press the "Change setting mode" button
Note: The code rate (e.g. 3/4) is automatically determined once the channel unit has locked on to the set transponder.
1.5 Selecting output channel or output frequency
The output channel unit is selected using the "<" and ">" buttons.
Using the "+" and "-" buttons the output channel can be adjusted from 48 MHz to 96 MHz and from 114 MHz to 858 MHz in 7 or
8 MHz steps.
A 1236
27.500 MS/s
Outp.
S21
8 MHz
Fine adjustments can be made to the output frequency in the output channel sub-menu in 250 kHz steps.
Press the "Sub-menu" button
MHz
3/4
306.00
QAM64
Main menu
(starts the mode)
MHz
3/4
306.00
QAM64
Main menu
to activate the sub-menu; press the "Sub-menu" button
TP A
QPSK
27.400
MHz Outp.
! 8
Main menu (example for digit-by-digit setting)
to end the mode.
TP ***
QPSK Frequency
MHz Level
! Output
5 / 14
1236 MHz
MS/s 3/4
S21 306.00
MHz QAM64
UFO331TP
MHz
306.25
0
on
"Output channel" sub-menu
again to deactivate it.
TP
QPSK
MHz
!
***