Kathrein UFO 331/TP Manual Del Usuario página 17

"P" Left from "TP":
"P" indicates that the channel fi lter is activated and that some channels may be removed from the transport stream.
If the front end is not clicked into place (no Sat input signal), the following display appears:
A 1236
27.500 MS/s
Outp. S21
8 MHz
Main menu (front end not clicked into place)
The modulation type of the satellite input signal can be seen on the main menu display.
It is always QPSK in operating mode DVB-S1. Both QPSK and 8PSK are available in DVB-S2 mode.
A 1236
27.500 MS/s
Outp. S21
8 MHz
Main menu (example for DVB-S1)
1. Confi guration of the channel unit
1.1 Selecting the input socket
The socket A or B to be used for the input can be selected in the main menu for the system.
1236
A
27.500 MS/s
Outp. S21
8 MHz
The following settings are available: A or B
1.2 DiSEqC setting
TM
The DiSEqC controller for a matrix can be set in the sub-menu for the input socket that was selected.
TM
Press the "Sub-menu" button
A 1236
27.500 MS/s
Outp. S21
8 MHz
MHz *
---
306.00
QAM64
MHz
3/4
306.00
QAM64
MHz
3/4
306.00
QAM64
Main menu
to activate the sub-menu; press the "Sub-menu" button
MHz
3/4
306.00
QAM64
Main menu
TP
----
MHz
!
TP A
QPSK 22.000
MHz Outp.
! 8
TP
QPSK
MHz
!
TP ***
QPSK DiSEqC
MHz
!
3 / 14
2122 MHz
MS/s 2/3
S21 306.00
MHz QAM64
Main menu (example of DVB-S2)
again to deactivate it.
UFO331TP
off
Sub-menu for channel unit I
TP
8PSK
MHz
!
**