Before Installation; Installation - Renew PLUS Serie Manual De Instalación

BEFORE INSTALLATION

Be sure that all parts are on hand before proceeding with the installation .
Residual moisture in the bidet at purchase ensures that your product was tested at
the factory with pure water to meet the highest quality standards and performance .
Items required, but not included: GFCI wall outlet and flexible water supply hose .
Check the line that connects the toilet tank to the water shut off valve . If it's a rigid
pipe, you may need to purchase a flexible hose to replace it before installation . The
length of the hose and the size of the connections will vary .
Hand tightening is usually sufficient for the typical installation process . However, in
some situations, a screwdriver or adjustable wrench may be required .
TOP-MOUNT SEAT INSTALLATION
To install on toilets without access to bolts underneath, please call Bemis
Manufacturing Company Customer Service at 1-888-722-6488 to obtain a
top-mount hardware kit .

INSTALLATION

Please read these instructions carefully before installation.
Failure to do so could result in damage to the product or property.
1
Turn off water supply and drain all
water out of toilet tank by holding
flushing handle down for 10 seconds
or until tank is emptied .
2
Place a container underneath to catch
excess water . Remove the existing
water supply line from toilet tank water
supply fitting .
www.RenewSeats.com
2
1
5