Care & Maintenance - Renew PLUS Serie Manual De Instalación

CARE & MAINTENANCE
QUICK RELEASE LID
• To REMOVE the lid, raise the lid to the
upright (90°) position and gently lift up on
the left side of the lid to expose the hinges .
• Push the lid towards the right of the unit
so the right side of the lid slides out of the
rear bidet cover .
• To REINSTALL, insert the right side of the
lid into the rear bidet cover and line up the
hinge in the correct position in the lid for
the hinge to slide into .
• Press down and the hinge will click
into place .
QUICK RELEASE SEAT
• To REMOVE the bidet from the seat
bracket and the toilet, locate the quick
release button located on the right side of
the unit as you face the toilet .
• Press and hold the quick release button,
slide the seat forward towards the front of
the toilet and off of the seat bracket .
• To REINSTALL onto the seat bracket, line
up the bidet with the seat bracket and
slide it back onto the seat bracket unit
you hear a click . (See step 6 of the
installation instructions .)
DRAINING RESERVOIR TANK
To prepare for a period of non-use or storing the unit, drain the water from the unit .
• Unplug the power cord from the outlet . Do not touch the power outlet with wet
hands (risk of electric shock) .
• Turn off the water supply valve .
• Press the button on side of the bidet body to release seat and drain tank .
• Suggested maintenance: every 12 months or as needed .
16
7
7
www.RenewSeats.com
2
3