Technical Specifications - Beurer EM 30 Instrucciones Para El Uso

gram denote how often you have already fully completed a program. These numbers are stored until
there is a battery change.
6. Cleaning
– Remove the batteries from the device each time you clean it.
– Clean the device with a slightly moistened cloth. In case of more extreme soiling you can also
moisten the cloth with mild soapy water.
– Never drop the device.
– Ensure that no water penetrates into the device. If this should ever happen then only use the
device once it is completely dry.
– Do not use any chemical cleaners or abrasive agents for cleaning.
– Once you have removed the device (operating unit), you can wash the belt in luke warm
water. Use mild soapy water or a liquid detergent for this purpose. Do not use bleaches.
– The belt is unsuitable for machine washing.

7. Technical Specifications:

Model:
Power supply:
Electrode size:
Parameter (500 Ohm load):
Pulse duration:
Waveform:
Weight:
Belt size for waist measurement from 70 to approx. 130 cm. (28 – 52 Inch)
Maximum permissible operating conditions: 0 °C to +40 °C, 20-65% relative humidity
Maximum permissible storage conditions:
Explanation of symbols:
Changes to the technical specifications introduced for reasons of updating without notice are reserved.
Chère cliente, cher client,
Nous sommes très heureux que vous ayez choisi un produit de notre assortiment. Notre société
est réputée pour l'excellence de ses produits et les contrôles de qualité approfondis auxquels
ils sont soumis, dans les secteurs suivants: produits chauffants, thérapie douce, diagnostic de
pression sanguine, contrôle de la température corporelle, contrôle du poids, massage et dispositifs
d'amélioration de l'air.
Veuillez lire attentivement ce mode d'emploi et suivre les instructions qu'il contient.
Avec nos compliments
Votre équipe Beurer
EM 30
3 x 1.5 V AAA (type LR 03)
approx. 10 x 10 cm
– Output voltage max. 70V p-p
– Output current: max. 140mA p-p
– Output frequency: 30 – 80Hz
200µs per phase
symmetrical, dual-phase square wave
~ 330 g
0 °C to +55 °C, 10-90% relative humidity
- Application part type BF
- Caution! Read the Instructions for Use.
FRANÇAIS
14