Denver CRL-310 Instrucciones De Uso página 9

SETTING THE ALARM 2 (NATURAL SOUND)
Normal Time → AL 2 Hour → AL 2 Minute → AL 2 weekday → AL 2
beeper → AL 2 radio →AL 2 natural sound →(Use the unit buttons
(10) and (11) or the remote control buttons (7) and (11) to select the
desired natural sound) →AL 2 final natural sound volume →AL 2
Light → AL 2 Light intensity → Normal Time.
Proceed as follows:
1. In standby mode, Press the unit Alarm1 button (12) or the
remote control button (8). The currently set alarm time is shown.
2. Keep the button pressed for approx. 3 seconds when the alarm
time is displayed. The hours of the currently set alarm time start
to flash.
3. Use the unit buttons (10) and (11) or the remote control button
(7) and (11) for setting.
4. Press the unit Alarm 1 button (12) or the remote control button
(8) for confirmation. The minutes start to flash.
5. Use the unit buttons (10) and (11) or the remote control button
(7) and (11) for setting.
6. Now select the days you want the alarm to sound. The following
selections can be made:
• 1-5 = Monday to Friday
• 1-7 = Monday to Sunday
• 6-7 = Saturday and Sunday
• 1-1 = Weekday
6a. When you have selected the setting 1-1:
1. Press the button to select the weekday.
2. Make your selection with the buttons and.
(1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday,
6 = Saturday, 7 = Sunday)
7. Press the button to confirm. Then select how you want to be
awakened. Select from:
• "bu" (buzzer):
A buzzer sounds when the alarm time is reached.
The buzzer interval increases from slow to fast. The volume cannot
be adjusted.
• Radio frequency is displayed:
As soon as your set alarm time is shown, the radio switches on. The
last set station is played. The volume increases slowly to the set
volume. The volume cannot be adjusted.
ENG-8