LG 32LY760H Manual Del Propietário página 29

01. Power (Command: k a)
To control Power On/Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Data 00: Power Off Data 01: Power On
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data]
[x]
* In a like manner, if other functions
transmit 'FF' data based on this format,
Acknowledgement data feedback presents
status about each function.
* Note: In this model, set will send the
Acknowledge after power on processing
completion.
There might be a time delay between
command and acknowledge.
02. Input Select (Command: x b)
To select input source for set.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna)
Data 01: DTV (Cable)
Data 10: Analog (Antenna)
Data 11: Analog (Cable)
Data 20: AV or AV1
Data 21: AV2
Data 40: Component or Component1
Data 41: Component2
Data 60: RGB-PC
Data 91: HDMI2
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data]
[x]
* Use the feature depending upon your model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
Data 02: 16:9
Data 04: Zoom
Data 06: Set by program
Data 1F: Cinema Zoom16
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data]
[x]
Data 90: HDMI1
Data 92: HDMI3
Data: 09: Just scan
Data: 10: Cinema Zoom 1
EXTERNAL CONTROL DEVICE SETUP
04. Screen Mute (Command: k d)
To select screen mute on/off.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on), Video-
out Mute off
Data 01: Screen mute on (Picture off)
Data 10: Video-out Mute on
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data]
[x]
*In case of Video-out Mute on only, TV will
display On Screen Display (OSD). But, in case
of screen mute on, TV will not display On
Screen Display (OSD).
05. Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE
button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data]
[x]
06. Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data]
[x]
29