Tools And Materials; Before You Begin - Kohler K-5802 Guia De Instalacion

Tools and Materials

Tape
Safety
Measure
Glasses
Drill
Sealant
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.

Before You Begin

CAUTION: Risk of personal injury or product damage. Cast
iron sinks are very heavy. Get help lifting the sink into place.
Observe all local plumbing and building codes.
Prior to installation, unpack the new sink and inspect it for
damage. Return the sink to its protective carton until you are
ready to install it.
This sink is not intended for undercounter installation.
Inspect the drain and supply tubing. Replace if necessary.
If possible, assemble the faucet and strainer to the sink before
installing the sink.
To ensure a safe and damage-free installation, two people should
install the sink.
For a replacement installation, make sure the existing cut-out is
the same size or smaller than the cut-out for the new sink.
1019941-2-A
Keyhole/Compass
Pencil
Saw
Plus:
1/2" or larger drill bit
Rags or paper toweling
2 Kohler Co.