Troubleshooting - Klarstein Powericer XL Manual De Instrucciones

Special Note on Item number
10013323
If the ice maker will be unused for long periods,
please screw off the plastic drainage connector
screw (12) on the back of the unit in order to
drain the surplus water in the water groove, then
screw it back on. Wipe the inner liner of the ice
storage container with a clean cloth.

TROUBLESHOOTING

Problem Possible Cause
The unit does The voltage is out of limit.
not work.
The ambient temp is lower than
10°C.
Water shortage Water shortage from the water
indicator lights supply system.
on.
Water valve damaged.
Tap water pressure too low.
Compressor Water shortage.
doesn't work.
Ice bucket is full.
Suggested Solution
Stop the ice maker and restart it
until the voltage is normal.
Try again when the ambient
temperature higher than 10°C.
Check the water supply. If it is
OK, restart the unit.
Check the water valve.
Be sure the tap water pressure is
2
higher than 1kg/cm .
Check the water supply system
(water valve and water supply
tube).
Take out some ice.
EN
17