FAAC XTR B Manual De Instrucciones página 33

Maintained action command 1
1. Bring the Tag close to the reader in standby and
hold it there:
- The XTR B will BEEP once and the LEDs will
come on steadily
- after 2 s, the XTR B will BEEP twice and flash
twice.
- after 2 s, the XTR B will BEEP 3 times and flash 3
times, then the LEDs will come on steadily
- after 3 s, the maintained action command is
activated
2. Move the Tag away when you wish to stop the
command, the LEDs turn off.
Maintained action command 1
1
1 +
,
 2 s , 2 ( ) ,
 2 s , 3 ( ) ,
 3 s  Maintained action command 1
2
XTR B
... ~ 9 s
,
... 
STOP
Maintained action command 2
1. Bring the Tag close to the reader in standby and
hold it there:
- The XTR B will BEEP once and the LEDs will
come on steadily
- after 2 s, the XTR B will BEEP twice and flash twice
- after 2 s, the XTR B will BEEP 3 times and flash 3
times, then the LEDs will come on steadily
2. Move the Tag away within 2 s and bring it back
to the reader within 5 s:
- The XTR B flashes once and the maintained action
command is activated
3. Move the Tag away when you wish to stop the
command, the LEDs turn off.
Maintained action command 2
1
1 +
,
 2 s , 2 ( ) ,
 2 s , 3 ( ) ,
 2 s MAX
2
 Maintained action command 2
1 ,
3
12
... ~ 6 s
 5 s MAX
... 
STOP
532109 - Rev.A
...