Usage; 1Ch Mode: 1 Command; 2Ch Mode: 2 Commands - FAAC XTR B Manual De Instrucciones

8. USAGE

1CH MODE: 1 COMMAND

1. Bring the Tag up to the reader in standby:
- The XTR B will BEEP once and the LEDs will come
on steadily
2. Give an impulse or maintained action command.
A. Impulse command: move the Tag away im-
Impulse command in Single channel mode
1
1 +  Command ,

2CH MODE: 2 COMMANDS

Impulse command 1
1. Bring the Tag up to the reader in standby:
- The XTR B will BEEP once; the LEDs come on stead-
ily.
2. Move the Tag away within 2 s .
- The command is activated; the LEDs turn off.
Impulse command 1
1
...  2 s MAX
1 +  Command 1 ,
XTR B
mediately.
B. Maintained action command: move the Tag
away only when you wish to stop the command.
When the Tag is moved away, the LEDs turn off.
Maintained action command in Single channel mode
1
... 
1 +  Maintained action command ,
Impulse command 2
1. Bring the Tag close to the reader in standby and
hold it there.
- The XTR B will BEEP once; the LEDs come on
steadily.
- after 2 s, the XTR B will BEEP twice and flash
twice.
2. Move the Tag away within 2 s .
- The command is activated; the LEDs turn off.
Impulse command 2
1
... ~ 2 s
1 +
, ... 2 s 2 ( )
...  2 s MAX
2
 Command 2
11
2
... 
STOP
532109 - Rev.A