Peg-Perego culla primonido Instrucciones De Uso página 12

the bassinet's backrest should be
lowered completely.
• Before unfastening and lifting the
bassinet from the frame, adjust the
backrest to its lowest position
• Do not add or use mattresses different
from the original one.
• This product is compatible with original
PegPerego products.
• For information on the product's
compatibility with PegPerego
accessories/frames, visit:
www.pegperego.com
COMBINED WITH CHASSIS:
• WARNING: make sure that all the
attachment devices of the Culla
Primonido are correctly fixed before
using.
• WARNING: never leave the child
unattended.
The images referring to the textile details may
differ from the collection purchased.
For more information, consult our website:
www.pegperego.com
INSTRUCTIONS FOR USE
Using the pram
1 HOOD: Lift the hood until it clicks. Fasten the 6 buttons on
the lower profile.
2 To lower the hood, press on the handle bar while lowering it.
3 FOOT MUFF: Fit the foot muff and button it to the side.
4 The magnets can be used to fasten the foot muff to the
hood, to protect the child even more against the elements.
Just lift the foot muff as shown.
5 The bassinet has a zip to provide extra ventilation.
6 BACKREST ADJUSTMENT: pull the handle outwards and
rotate it clockwise to raise the backrest or anticlockwise to
lower it.
7 CARRY HANDLE: the handle bar is fitted with a carry
handle.
_ Before lifting the bassinet, ensure the built-in hood is
correctly fastened.
_ Before lifting the bassinet, make sure the hood is in the
correct position for transport.
_ Before unfastening and lifting the bassinet from the frame,
adjust the backrest to its lowest position.
8 FOUR SEASONS SYSTEM: as shown in the figure, it is
possible to adjust the product's air circulation from the
base in order to prevent condensation.
Move the lever to blue for a cool, well-ventilated
environment (summer), or to red to limit the intake of air
(winter).
9 To fasten the bassinet, position it on the frame and press
down with both hands until it clicks into place.
Always enable the brake on the frame before fastening and
unfastening the bassinet.
IMPORTANT: Ensure the bassinet is properly fastened.
10 To release it, press the lever under the bassinet and lift it.
11 REMOVING THE HOOD: To remove the hood, unbutton the
6 buttons on the lower edge.
12 Press the buttons on the two attachments and remove the
hood.
13 Remove the two rigid supports.
14 Raise the backrest (fig_a). This makes it easier to remove
the mattress (fig_b).
15 Remove the inner lining by opening the two zips on the
edge of the Culla Primonido.
16 Finally, unfasten the
bassinet and the other 4 positioned close to the hood
fasteners, and remove the outer lining.
12
8 elastic bands on the bottom of the