Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1. SELECT BLOWER OPTION AND INSTALLATION TYPE
E
ither an interior or an exterior blower or in-line blower may be used with this hood. The Best IP29M Series must be installed with
blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. Other blowers cannot be substituted. (Blowers
sold separately.)
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 9, 11 to 15, 17 and up of
this manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to seal duct joints.
ROOF CAP
DECORATIVE
FLUE
12", 18", 24" or 30"
(305, 457, 610 or 762)
or TRIM
HOOD
30" TO 36" (762 to 914)
ABOVE COOKING SURFACE
NOTE: Dimensions in ( ) are in mm.
HH0080A
MODEL P6 SINGLE INTERIOR BLOWER
TYPICAL DUCTWORK
DECORATIVE
FLUE
12", 18", 24" or 30"
(305, 457, 610 or 762)
or TRIM
HOOD
30" TO 36" (762 to 914)
ABOVE COOKING SURFACE
NOTE: Dimensions in ( ) are in mm
HH0082A
MODEL EB6, EB9, EB12 OR EB15
EXTERIOR BLOWER TYPICAL DUCTWORK
7" (178) ROUND DUCT
EXTERIOR
BLOWER
10" (254)
ROUND DUCT
- 5 -
DECORATIVE
FLUE
12", 18", 24" or 30"
(305, 457, 610 or 762)
or TRIM
HOOD
30" TO 36" (762 to 914)
ABOVE COOKING SURFACE
NOTE: Dimensions in ( ) are in mm.
HH0081A
MODEL P12 DUAL INTERIOR BLOWER
TYPICAL DUCTWORK
10" [254] ROUND DUCT
(except ILB3, 8'' [203] ROUND DUCT)
IN-LINE BLOWER
DECORATIVE
FLUE
12", 18", 24" or 30"
[305, 457, 610 or 762]
or TRIM
30" TO 36" [762 to 914]
ABOVE COOKING SURFACE
HH0083A
NOTE: Dimensions in [ ] are in mm.
MODEL ILB3, ILB6, ILB9 OR ILB11
IN-LINE BLOWER TYPICAL DUCTWORK
ROOF CAP
10" (254) ROUND DUCT
ROUND
TRANSITION
4½" x 18½"
to 10"
(114 x 470
to 254)
(see page 3)
ROOF CAP
WALL
CAP
HOOD
Tabla de contenido
