Inserting The Receipt Printer - Sony UPA-PC500 Guia De Instalacion

2
Press open the tabs on both sides of the receipt
printer cable, and disconnect the cable from the rear
of the receipt printer.
3
Remove the screw securing the printer bracket to
the bottom of the drawer, and lift out the printer and
bracket together.
4
Remove the two screws securing the printer bracket
to the receipt printer.
The old receipt printer is now removed. To finish the
replacement, you need to insert a new receipt printer.

Inserting the Receipt Printer

1
Secure the printer bracket to the rear of the receipt
printer with the two screws you removed earlier.
2
Insert the printer bracket in the drawer so that the
receipt printer is properly positioned.
3
Secure the printer bracket to the bottom of the
drawer with the screw you removed earlier.
4
Connect the receipt printer cable to the rear of the
receipt printer, and close the tabs on both sides of
the cable to lock it into place.
5
Close the cabinet.
For details, see "To close the cabinet" on page 7.
11
Replacing Components