Problem Solution - Worx WA3847 Manual Del Usuario

PROBLEM SOLUTION

1. i CaNNot Fit thE BattErY iNto thE
BattErY ChargEr. WhY?
The battery can be inserted into the charger
only in one direction. Turn the battery around
until it can be inserted into the slot, the red
LED light should turn on when the battery is
charging.
2. rEaSoNS For diFFErENt ChargiNg
tiMES
Your charge time can be affected by many
reasons, which are not defects in your
product. If the battery pack is only partly
discharged it may be re-charged in less
than 45 min. If the battery pack and ambient
temperature are very cold then re-charging
may take much more time. If the battery pack
is very hot it will not re-charge because the
internal temperature safety cutout will prevent
it. If the battery pack is very hot you must
remove your battery pack from the charger
and allow your battery pack to cool first to
ambient temperature and then recharging can
be started. If you charge a second battery pack
8
immediately after the first then the charger
can be overheated. Always allow at least 15
minutes rest between battery pack charging.
MAINTAIN TOOLS WITH
CARE
remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication
or maintenance. Never use water or chemical
cleaners to clean your power tool. Wipe clean
with a dry cloth. Always store your power tool
in a dry place.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order to
avoid a hazard.
Battery Charger EN